PHR-2S Superficial Rockwell Hardness Tester
PHR-2S portable superficial Rockwell hardness testers comply with the basic designing principles of Rockwell hardness testing in accordance with international standard ISO6508, American Standard ASTM E18 and ASTM E110. The hardness values can be read directly from the superficial Rockwell hardness testers after rapid and accurate operations. It can be considered as a non-destructive testing with very small indentations. This kind of testers can be used at site to test the finished or semi-finished work pieces piece by piece in batches. Superficial Rockwell hardness testers are mostly applied in the metal-processing enterprises.
Features of PHR-2S Superficial Rockwell Hardness Tester
1. High Accuracy
comply to standard ISO6508 and ASTM E18, E110.
2. Convenient to Use
Used on the desk as well as on site.
3. Wide Test Range
Test thin plate, shaft, small ball and so on.
4. Anvil
Test tin plate and cold-rolled sheet with diamond raised spot anvil.
5. Indentation
Small indentation and NDT testing on finished workpiece.
6. Test Block
Traceable standard hardness block.
Technical Parameters of PHR-2S Superficial Rockwell Hardness Tester
|
Initial Test Force: 3kgf
|
|
Total Test Force: 15kgf, 30kgf, 45kgf
|
|
Indenter: 120°diamond cone Ф1.588mm carbide ball
|
|
Accuracy: Meets the requirements of ISO6508, ASTM E18
|
|
Resolution: 0.5HR
|
|
Testing Range: HRN, HRT,HRW, HRX, HRY, etc. 15 scales.
|
|
Application: All metals including iron, steel, copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.
|
Package of PHR-2S Superficial Rockwell Hardness Test
English
français
Español
русский
