Stirring Shaft

Stainless Steal Stirring Shaft For Overhead Stirrers

① Three-Blade propeller type   ② Four-Blade propeller type  ③ Dissolve type

④ Centrifugal type                     ⑤ Fan type                              ⑥ Anchored type

1. Three-Blade propeller type: The use of medium or high speed. The standard stirring rod can cause the mixed media to move upside down with less Shear stress.
2. Four-Blade propeller type: The use of medium or high speed. It can cause the mixed media to move upside down with local Shear stress.
3. Dissolve type: The use of medium or high speed. It can cause Radial flow in both Upper and lower strata of the mixed media. The strong turbulence and high Shear stress produced can help to shatter the particles in liquid.
4. Centrifugal type: The use of medium or high speed. The two blades can expend with the increase of the speed, which can be suitable for narrow-mouth container. The mixing effect is similar to Four-blade type.
5. Fan type: The use of low to medium speed. It can cause tangential flow with less turbulence, which is suitable for tender mixing.
6. Anchored type: The use of low speed. It can cause tangential flow and High shear rate on the edge avoid deposition of the mixing media on the wall of container. It’s suitable for high viscosity fluid such as polymer reaction and scattering of minerals in liquid.

Stirring Shaft Parameter Table: