SW7 Ultrasonic Thickness Gauge

Through Paint Coating Ultrasonic Thickness Gauge Meter SW7

Measurement Range:
0.65 ~400mm(Steel),
0.3~200mm(Glass)
4~80mm(High temperature), 3~50mm(Gray Iron)
Notes: Thickness range depends on material transducer type, surface condition and temperature.
SW7 Measuring Rang(Through Coating): 3 mm -20 mm
Material Velocity Range: 509~18699m/s
Measuring Accuracy: ±0.05mm
Display Accuracy: 0.01mm / 0.1mm
Scanning Rate: 2~20 times/sec.
Scan Velocity: 2times/s- 20times/s
Frequency Bandwidths: 1-10MHz
Measuring lower limit of pipes:
(Depend on the probe)
Φ15mm×1.0mm (Probe: 5MHz, Φ10mm)
Φ10mm×1.2mm (Probe: 7.5MHz, Φ6mm)
Display Mode: 128×64 matrix LED
Power supply: 2  AA  Alkaline Batteries
Operating Time:
280 hours typical battery life,
100 hours continuous with backlight on
Operating Temperature Range:
-10 -  50 (Ambient Environment)
-10 - 300 (High Temperature Mode)
Gage Size:
136 mm×72 mm×20mm
Gage Weight:
176g(Including Batteries)
SW7 Standard Configuration
• Gage One Set
• Probe One Set(5MHz, Φ10mm)
• Couplant One Bottle(30ml, Glycerin)
• Battery: 2 AA Alkaline Batteries
• Guide Manual
• Hermetic Plastic Kit (27cm X 23cm X13cm)
• USB Cable
• Software Disk