Infrared Halogen Moisture Meter Tester For Agriculture, Medicine, Plastic
1. Introduction of XY-MW Halogen Moisture Meter:
Infrared Moisture Goniophotometer is a new type of high-speed infrared moisture test instrument and can be used to measure the moisture of any material. (Except the substances which generate dangerous chemical reaction through heating) The instrument is designed in accordance with the thermogravimetric principle. While the instrument measures the weight of samples, infrared heating units and water evaporation channels dries samples rapidly too. In the drying process, instrument measures continually and displays immediately the lost moisture (%) of the samples in the process. When the drying is completed, the finally measured moisture is locked.
Press the display button, data such as the moisture value, the starting value of the weight, the initial value and measuring time can be observed. Compared with the traditional oven heating method, infrared heating can achieve maximum heating power in the shortest possible time because that the samples are dried rapidly in high temperature can greatly accelerate the measurement time. The instrument is applicable to all the fields which need rapid moisture measurement such as medicine, grain, tobacco, chemicals, tea, foods, textiles, agriculture and forestry, etc. This instrument is able to communicate with computer. Measuring data of moisture can be printed out though the computer or directly by the printer matched.
Features of XY-MW Halogen Moisture Meter:
Applicable to all the fields which need rapid moisture measurement such as medicine, grain, tobacco, chemicals, teas, foods, textiles, agriculture and forestry, etc.
Specification XY-MW Halogen Moisture Meter:
|
Mode
|
XY-105W
|
XY-102W
|
XY-100W
|
|
Specification
|
110g/5mg
|
110g/2mg
|
110g/1mg
|
|
Readability
|
5mg
|
2mg
|
1mg
|
|
Tray size
|
Φ 90
|
|
Heating mode
|
Halogen Lamp
|
|
Display
|
LCD
|
|
Temperature Setting
|
40ºC~199ºC
|
|
Time Setting
|
1~99 minutes
|
|
ATRO
|
100%~999%
|
|
ATRO
|
0%~999%
|
|
History store
|
15 set
|
Use halogen moisture analyzer should attention:
1. Halogen moisture analyzer is used to measure the moisture content in the sample, used for any other purpose are likely to cause harm and personal damage the instrument.
2. Please read the instructions carefully before you use it, do not use it under the environment condition which not meet the requirements.
3. Halogen rapid moisture analyzer only suit for professional operate.
4. Halogen rapid moisture analyzer for power for the three plug with earthing socket, banned disconnect apparatus grounding or use without a good grounding power supply.
5. Instrument around should ensure that there is enough space, so as to avoid heat accumulation and heat.
6. Please do not put flammable and explosive goods around the instrument.
7. After the test, the heating unit and the container is still very hot, so please do not touch it.
8. Toxic substances testing should be under ventilation environment.
English
français
Español
русский
