PHR-32 Chain Clamp Rockwell Hardness Tester
PHR Chain Clamp Rockwell Hardness Tester which can test the hardness of cylindrical workpieces such as pipes, shafts, rollers accurately on-site. The test principle and accuracy comply to standard ISO 6508 and ASTM E110. Tested by National Institute of Metrology with tolorance ＜1.5HRC, equivalent to bench hardness tester. So this kind of Rockwell hardness testing machine is usually used for manufacturing inspection and acceptance inspection to replace Leeb hardness tester with lower accuracy.
Features of PHR-32 Chain Clamp Rockwell Hardness Tester
1. On-site Tesing
Testing the hardness of large pipes and shafts accurately on-site.
2. Anvils
Testing various dimensions and shapes workpiece by using different anvils.
3. Application
Chain fastened around the workpiece before the force is applied.
4. Relevant Standards
Comply to standard ISO 6508 and ASTM E18, E110.
5. Hardness Block
Traceable standard hardness block.
6. Indenter
Indenter inspected by standard Rockwell hardness tester.
Technical Parameters of PHR-32 Chain Clamp Rockwell Hardness Tester
|
Initial Test Force: 10kgf
|
|
Total Test Force: 60kgf, 100kgf, 150kgf
|
|
Force Applying Method: By Screw
|
|
Indenter: 120°diamond cone / Ф1.588mm carbide ball
|
|
Accuracy: Meets the requirements of ISO6508，ASTM E18
|
|
Resolution: 0.5HR
|
|
Testing Range: HRA, HRB, HRC, etc.15 scales.
|
|
Application: All metals including iron, steel, copper, aluminium, etc.
|
Package of PHR-32 Chain Clamp Rockwell Hardness Tester
English
français
Español
русский
