PHR-8-4 C Clamp Rockwell Hardness Tester
PHR-8-4 C clamp Rockwell hardness tester is designed according to the basic principle of Rockwell hardness test. The principle and structure of this kind of hardness tester is in accordance with the American Standard ASTM E110.
Compared with small type, C clamp Rockwell hardness tester applies part clamping structure and similar reading system as micrometer, so it is prior to small type for its good stability, repeatability, accuracy.
This portable Rockwell unit is small, light, accurate portable hardness tester. It consists of C- shape frame, screw arbor, and test head. It could test flat or curve parts as long as the parts could be clamped and the test surface erects the test head. It could be applied in production inspection and acceptance inspection to replace low accurate Leeb hardness tester.
Features of PHR-8-4 C Clamp Rockwell Hardness Tester
1. Test Principle
This hardness testing equipment follows Rockwell hardness test method and test condition, and the result is reliable.
2. Simple Operation
Fix the instrument to part and clamp it and test the hardness of part, no need to move the part.
3. High Accuracy
Test fast, convenient, non-destructive.As accurate as desk tester, error less than 1.5HRC.
4. High Reliability
Structure as simple as micrometer, accurate, convenient, repeatable.
Technical Parameters of PHR-8-4 C Clamp Rockwell Hardness Tester
|
Preliminary test force:10 kgf
|
|
Total test Force: 60 kgf, 100 kgf, 150 kgf
|
|
Test head: 120°diamond indenter/1.588mm carbide alloy ball
|
|
1.588mm carbide alloy ball
|
|
Indication Error: complying with ISO 6508 and ASTM E18
|
|
Repeatability Error: complying with ISO 6508 and ASTM E18
|
|
Test Resolution: 0.5HR
|
|
Application range: common metal including iron and steel,cooper, aluminum,
|
Package of PHR-8-4 C Clamp Rockwell Hardness Tester
English
français
Español
русский
