PHB-200 Digital Magnetic Brinell Hardness Tester
With the magnetic chucks, fix the PHB-200 Digital Brinell Hardness Tester on the specimen surface and finish testing. It is completely based on the Brinell test principle, and the test method complies with GB/T231.2, ASTM E10, ISO6506.2.
Being used together with the Brinell Indentation Measurement System, it can be applied to quick and precise test of specimen's Brinell hardness on site.
Applied to steel parts that too large or too heavy for table tester to test.
Applied to testing heat treatment parts such as steel plate, pipe, mould with available testing surface.
Applied to testing the hardness of weld joint on boilers, pressure vessels and pressure pipes.
The PHB-200 tester could replace the Leeb hardness tester which is in low accuracy and reliability.
Features of PHB-200 Digital Magnetic Brinell Hardness Tester
1. Patented Product
This Brinell testing machine is the patented product of TX company, and is unique all over the world.
2. High Reliability
The PHB-200 Brinell hardness tester applies the abroad high qualified force sensor and electronic devices with high integration level and stability.
3. Small And Convenient
The tester has a weight of only 5.1kg, being the smallest Brinell Hardness Tester so far.
4. Design of Light
The light on the test point brings much convenience for observing test procedure.
5. Digital Display Function
The Brinell hardness testing machine applies digital display technology to show the force value and other operating information. More simple to operate.
6. Traceable Calibrated Block
It is the calibrated hardness block that comes with the Brinell Hardness Tester.
Technical Parameters of PHB-200 Magnetic Digital Brinell Hardness Tester
|
Test Force: 187.5kg
|
|
Test Force Error: ≦±1%
|
|
Complies with GB/T231.2,ASTM E10, ISO6506.2
|
|
Indenter: 2.5mm test ball
|
|
Testing Range: 100-650HBW
|
|
Indication Error: Complies with GB/T231.2,ASTM E10, ISO6506.2
|
|
Indication Repeatability: Complies with GB/T231.2,ASTM E10, ISO6506.2
|
|
Operating Temperature: 5-45℃
|
|
Nominal Dimension: Length 245mm × Width 105mm × Height 238mm
|
|
Weight: 5.1kg
|
|
Test Piece Surface: Flat: Area ≧195×60mm Thickness ≧5mm
|
|
Cylinder: Diameter ≧60mm Length ≧200mm
|
|
Thickness ≧8mm
|
Relevant Standards of PHB-200 Magnetic Digital Brinell Hardness Tester
ASTM Standards
ASTM E10-14 Standard Test Method for Brinell Hardness of Metallic Materials
International Standards
ISO 6506-2:2014 Metallic Materials- Brinell Hardness Test-Part 2: Verification and Calibration of Hardness Testing Machines
Assembly of PHB-200 Magnetic Digital Brinell Hardness Tester
English
français
Español
русский
